Balson Polyplast Private Limited

• Irrigation Screen Filter are always installed for final filtration as an additional safeguard against clogging.
• While the majority of impurities are filtered by the sand filter, minute sand particles and other small impurities pass through it.
• The screen filter, containing a screen strainer, which filters physical impurities and allows only clean water to enter into the micro-irrigation system.
• The screens are usually cylindrical and made of non-corrosive metal or plastic material
• It’s available in 60 to 120 mesh.
• Flow rate ranges 7m3/Hr to 50m3/Hr
• It’s available in powder-coated metal body as well as in plastic body

The most impotent process of irrigation with water-soluble fertilizer is called fertigation. Mainly venturi injector uses fertigation equipment

• Self operated by the water pressure of the network
• Controlled /adjustable suction of fertilizer.
• Delivers plant nutrients directly into the wetted zone.
• Uniform application of fertilizer
• Saves energy and manpower
• Suitable for injecting upto 2000 l/h
• Available Size in 1”, 3/2”, and 2”

• Hydrodynamically designed to create maximum centrifugal action
• Separate sand from irrigation water
• Dirt can be easily flushed out through drain port
• Available in size 2” to 4”
• Flow rate from 25 M3/HR to 50 M3/HR
• Price Range: RS 7000-8500/Piece

• Removes very fine solid particles from irrigation water
• Excellent mechanical strength
• Chemical and corrosion resistance
• Disk filter contains stacks of grooved, ring-shaped disks that capture debris and are very effective in the filtration of organic material and algae.
• During the filtration mode, the disks are pressed together.
• There is an angle in the alignment of two adjacent disks, resulting in cavities of varying size and partly turbulent flow. Flow rate ranges from 7m3/Hr to 50m3/Hr.
• Diameter ¾ “ to 3”